Roman Blinds

How do I measure for Roman Blinds?

  • For accuracy we advise that you use a metal measuring tape.
  • Always double check your measurements.
  • Look at window and decide if your blind is inside recess or outside recess.  (If you are unsure please call on 01379 668170).

 INSIDE RECESS

Width:

Measure the width in several places, especially at the very top and bottom.  Note the narrowest measurement.

This figure is your blind width.

Drop:

Measure the drop in several places, especially the outside edges.  Note the shortest measurement.

This figure is your blind drop.

 

 

OUTSIDE RECESS

 

 

 

 

Width:

Check for obstructions and decide how much you would like the fabric to overlap the recess edges (minimum of 5cms each side is recommended).

Measure and note the decided width.

This figure is your blind width.

Drop:

Check for obstructions and decide where you would like the top and bottom of the blind to start and finish (10-15cms above the recess and a minimum of 5cms below the recess are a good guide).

Measure and note the decided drop.

This figure is your blind drop.

We are always happy to hear from you, so if you need any further help please call on 01379 668170 or email info@nataliecanninginteriors.co.uk.

PLEASE NOTE WE HAVE A SUMMER SHUT DOWN FROM 21/8/14 - 8/9/14.  ALL ORDERS/ENQUIRIES PLACED WITHIN THESE DATES WILL NOT BE PROCESSED UNTIL MONDAY 8TH SEPTEMBER.  

Natalie Canning Interiors © 2014
Site design by point red design using OpenCart